“I ＬＩＫＥ?。停茫眨?/p>本文引用地址：http://www.biyoush.com/article/201611/320189.htm

　　　　　　?。兀桑粒稀。祝铡　?rdquo;

　　　且顯示方式為從右邊屏依次向左動態移出。

解決方案：（ｃ語言編程）

#include
#define uchar unsigned char
#define uint unsigned int
uchar code table[]="I LIKE MCU!";
uchar code table1[]="XIAO WU" ;
sbit lcdrs=P1^7;
sbit lcdrw=P1^6;
sbit lcde=P2^4;
sbit le=P3^6;
sbit leden=P2^5;
sbit dkle=P3^7;
void delay(uint a) ;
uchar num;

void write_com(uchar com)　　//寫入命令子函數
{
lcde=0;
lcdrw=0;
lcdrs=0;
delay(1);
lcde=1;
delay(1);
P0=com;
delay(1);
lcde=0;
}
void write_data(uchar dat)　//寫入數據子函數
{
lcde=0;
lcdrw=0;
lcdrs=1;
delay(1);
lcde=1;
delay(1);
P0=dat;
delay(1);
lcde=0;
}
void init()　　//初始化子函數
{
lcde=0;
le=0;
leden=0;
write_com(0x38);
write_com(0x0f);
write_com(0x01);
write_com(0x80+0x10);

}
void main()　　//主函數
{
init();
for(num=0;num<11;num++)　//寫入第一行
{
write_data(table[num]);
delay(1);
}
write_com(0x80+0x40+4+0x10);
for(num=0;num<7;num++)//寫入第二行
{
write_data(table1[num]);
delay(1);
}
for(num=0;num<16;num++)　　//向左動態左移
{
write_com(0x18);
delay(10);
}
while(1) ;
}

void delay(uint a) {　　//延時函數
uint i,j;
for(j=a;j>0;j--)
for(i=2500;i>0;i--) ;
}