linux內核中的信號機制--從用戶層到內核層
加入技術交流群
CPU architecture：ARM920T
本文引用地址：http://www.biyoush.com/article/201611/320007.htmAuthor：ce123(http://blog.csdn.net/ce123)
1.簡介
如果進程要處理某一信號，那么要在進程中注冊該信號。注冊信號主要用來確定信號值及進程針對該信號值的動作之間的映射關系，即進程將要處理哪個進程和該信號被傳遞給進程時，將執行何種操作。主要有兩個函數實現信號的注冊：signal()和sigaction()。
2.signal()
signal()的函數原型如下：
[plain]view plaincopyprint?
- void(*signal(intsignum,void(*handler)(int)))(int);
[plain]view plaincopyprint?
- #include
上述聲明格式比較復雜，如果不清楚如何使用，也可以通過下面這種類型定義的格式來使用（POSIX的定義）：
[plain]view plaincopyprint?
- typedefvoid(*sighandler_t)(int);
- sighandler_tsignal(intsignum,sighandler_thandler);
- SIG_IGN：忽略參數signum所指的信號。
- SIG_DFL：恢復參數signum所指信號的處理方法為默認值。
signal()通過系統調用sys_signal()為一個指定的信號設置用戶態處理函數。sys_signal()定義如下：
[plain]view plaincopyprint?
- /*
- *Forbackwardscompatibility.Functionalitysupersededbysigaction.
- */
- asmlinkageunsignedlong
- sys_signal(intsig,__sighandler_thandler)
- {
- structk_sigactionnew_sa,old_sa;
- intret;
- new_sa.sa.sa_handler=handler;
- new_sa.sa.sa_flags=SA_ONESHOT|SA_NOMASK;
- ret=do_sigaction(sig,&new_sa,&old_sa);
- returnret?ret:(unsignedlong)old_sa.sa.sa_handler;
- }
__sighandler_t的定義如下：
[plain]view plaincopyprint?
- typedefvoid__signalfn_t(int);
- typedef__signalfn_t__user*__sighandler_t;
信號由sys_signal()的第一個參數指定，信號處理函數的地址由第二個參數指定。sys_signal()根據這兩個參數設置一個k_sigaction結構，然后調用do_sigaction()，該函數的定義我們會在后面具體講解。
2.sigaction()
sigaction()的函數原型如下：
[plain]view plaincopyprint?
- sigaction(intsignum,conststructsigaction*act,structsigaction*oldact);
2.1do_sigaction()
[plain]view plaincopyprint?
- int
- do_sigaction(intsig,conststructk_sigaction*act,structk_sigaction*oact)
- {
- structk_sigaction*k;
- if(!valid_signal(sig)||sig<1||(act&&sig_kernel_only(sig)))
- return-EINVAL;
- k=¤tt->sighand->action[sig-1];
- spin_lock_irq(¤tt->sighand->siglock);
- if(signal_pending(current)){
- /*
- *Iftheremightbeafatalsignalpendingonmultiple
- *threads,makesurewetakeitbeforechangingtheaction.
- */
- spin_unlock_irq(¤tt->sighand->siglock);
- return-ERESTARTNOINTR;
- }
- if(oact)//把原來的k_sigaction保存到oact結構中，這里是對整個數據結構進行復制
- *oact=*k;
- if(act){
- /*
- *POSIX3.3.1.3:
- *"SettingasignalactiontoSIG_IGNforasignalthatis
- *pendingshallcausethependingsignaltobediscarded,
- *whetherornotitisblocked."
- *
- *"SettingasignalactiontoSIG_DFLforasignalthatis
- *pendingandwhosedefaultactionistoignorethesignal
- *(forexample,SIGCHLD),shallcausethependingsignalto
- *bediscarded,whetherornotitisblocked"
- */
- if(act->sa.sa_handler==SIG_IGN||
- (act->sa.sa_handler==SIG_DFL&&
- sig_kernel_ignore(sig))){
- /*
- *Thisisafairlyrarecase,soweonlytakethe
- *tasklist_lockonceweresurewellneedit.
- *Nowwemustdothislittleunlockandrelock
- *dancetomaintainthelockhierarchy.
- */
- structtask_struct*t=current;
- spin_unlock_irq(&t->sighand->siglock);
- read_lock(&tasklist_lock);
- spin_lock_irq(&t->sighand->siglock);
- *k=*act;//把新的k_sigaction結構復制到進程的sighand->action中
- sigdelsetmask(&k->sa.sa_mask,
- sigmask(SIGKILL)|sigmask(SIGSTOP));
- rm_from_queue(sigmask(sig),&t->signal->shared_pending);
- do{
- rm_from_queue(sigmask(sig),&t->pending);
- recalc_sigpending_tsk(t);
- t=next_thread(t);
- }while(t!=current);
- spin_unlock_irq(¤t->sighand->siglock);
- read_unlock(&tasklist_lock);
- return0;
- }
- *k=*act;//把新的k_sigaction結構復制到進程的sighand->action中
- sigdelsetmask(&k->sa.sa_mask,
- sigmask(SIGKILL)|sigmask(SIGSTOP));
- }
- spin_unlock_irq(¤tt->sighand->siglock);
- return0;
- }
評論