#include <avr/io.h>
#include
#include interrupt.h>

#define ling 0x80 //這里是設制從最高位一個一個的點亮
volatile unsigned char count,i = 0,j = 0; //設制兩個變量


void Timer0_Init(void) //定時器0的初始化
{
TCNT0 = 0x3d; //給計數器賦初值
TCCR0 = 0x05; //CLK/1024分頻
TIMSK = 0x01; //始能定時器0的溢出中斷
sei(); //置位總中斷
}

int main(void)
{
DDRB = 0xff; //PB口設制為輸出
PORTB = 0xff; //PB口初始化為FF
Timer0_Init(); //調用定時器0的初始化

while(1);


}

ISR(TIMER0_OVF_vect) //定時器溢出中斷函數
{
//unsigned char i;
TCNT0 = 0x3d; //重裝載計數器的值a
i++; //標志位加1
if(i == 20)
{

//PORTB = 0xff;
i = 0;
count++;
if(count > 7) //點亮8個LED的循環
{
count = 0;
j =!j;
}

}
if(j == 0)
PORTB &= ~(ling >> count);
else PORTB |= (1 << count);

}