#include
#include
sbit D2=P1^3;
void OSCILLATOR_Init(void)
{
U8 SFRPAGE_save = SFRPAGE;
SFRPAGE = CONFIG_PAGE;
OSCICN = 0x87; // Set internal osc. divider to 1

SFRPAGE = SFRPAGE_save;
}
void PORT_Init(void)
{
U8 SFRPAGE_save = SFRPAGE;
SFRPAGE = CONFIG_PAGE;
P1MDIN |= 0x08; // P1.3 is digital
P1MDOUT = 0x08;
XBR2 = 0x40; // Enable crossbar and GLOBAL enable weak pull-ups
SFRPAGE = SFRPAGE_save;
}
/*void Delay(unsigned m)
{
char i=0;
while(--m)
{
for(i=0;i<120;i++);//修改i的最大值來調整延時時間，延時時間計算：
}

}*/
//延時可以使用上面的或下面的雙層for循環，單層時間太短
void delay()
{
unsigned int i;
unsigned char j;
for(i=1;i<3000;i++)
{
for(j=1;j<120;j++);
}

}
void main()
{
OSCILLATOR_Init();//時鐘初始化
PORT_Init();//端口初始化
PCA0MD &= ~0x40; //禁止看門狗
D2=1;
//Delay(1200);
delay();
D2=0;
delay();
//Delay(1200);
}