簡單伺服測試儀電路
加入技術(shù)交流群
簡單伺服測試儀電路--Simple Servo Tester
本文引用地址：http://www.biyoush.com/article/163322.htm
click here to download schematic in pdf
This is a simple servo tester which will comprehensively test the capabilities of almost any modern servo. It has two pushbuttons, CENTRE and SWEEP and a potentiometer which works as follows:
- CENTRE Does exactly that, centers the servo, afterwards the potentiometer determines position.
- SWEEP Sweeps the servo back and forth at a rate determined by the potentiometer setting.
The PIC uses its internal timer to set up a constant frame duration of 20ms and the on/off ratio is set by the user.
Have Fun
ed
DIY機械鍵盤相關(guān)社區(qū):機械鍵盤DIY
評論